Postion：
| 一、specification | ||||
| English item | specification | |||
| Overall dimension (length × wide × Height) mm | 2070×785×1170mm | |||
| Wheelbase mm | 1375 | |||
| Minimum ground clearance mm | 265 | |||
| Seat cushion height mm | 910 | |||
| Operating handle return angle (left/right) | ≤41° | |||
| Minimum turning radius mm | 2240 | |||
| Final transmission ratio | 16:50 | |||
| Climbing slope | ≥18° | |||
| Seats | 2 | |||
| Shift mode | Five-gear international | |||
| Fuel tank volume L | 10 | |||
| Fuel type | 90# | |||
| Rated maximum load kg | 150 | |||
| Net weight kg | 116 | |||
| Curb weight Kg | 129 | |||
| Maximum load total kg | 276 | |||
| Maximum speed Km/h | 85 | |||
| Braking performance m | ≤7m/30km/h | |||
| Starting performance S | ≤15S | |||
| Rated power Kw/r/min | 10.5KW/7500±500r/min | |||
| Economic fuel consumption L/100Km | 2.9 | |||
| Brake | front | Disc brake | ||
| rear | Hub brake | |||
| Brake operation | front | Hand brake | ||
| rear | foot brake | |||
| wheel | Net wheel | |||
| spoke wheel size | front：1.4×21 rear ：2.15×18 | |||
| tyre | off -raod tyre | |||
| tyre size | front：2.75-21 rear：4.60-18 | |||
| Tyre pressure (front/rear) Kpa | 225/280 | |||
| Specification and illumination of large bulb | 12V-35W/35W ≥10000cd | |||
| Steering bulb specification | 12V-10W | |||
| Battery specification | GTX6.5-BS 140×68×100 | |||
| 二、 ENGINE SPECIFICATION | ||||
| Engine type | CGN250 built-in balance shaft, single cylinder, four - punch, air - cooled | |||
| Magneto type | 12V 8 pole full wave AC | |||
| Stroke mm | 66.6 | |||
| Cylinder diameter mm | 65.5 | |||
| Working volume of cylinder ml | 225 | |||
| Compression ratio | 9：1 | |||
| Fuel grade | 90 # gasoline | |||
| Total oil capacity L | 1.1 | |||
| Spark plug model | D8RTC | |||
| Spark plug gap mm | 0.6～0.7 | |||
| Valve clearance mm | 0.05±0.02mm | |||
| Starting mode | Electric start/kick start | |||
| Lubricating oil grade | 15W/40 | |||
| Lubrication method | Splash pressure lubrication | |||
| Ignition mode | C.D.I | |||
| Carburetor model | PZ30 | |||
| Carburetor type | Horizontal suction plunger type | |||
| Transmission type | Constant mesh two-stage transmission and five-speed transmission | |||
| Clutch type | Multi-disc oil bath manual clutch | |||
| Primary gear ratio | 3.333 | |||
| Gearshift ratio | i1=2.909 ,i2=1.866.i3=1.388,i4=1.150，i5=0.954 | |||
| Output transmission mode | Chain drive | |||
| Rotation direction of output shaft | Face the output shaft and rotate counterclockwise | |||
| Overall dimension (length × wide × Height) mm | 330×318×390 | |||
| Net mass Kg | 35±1 | |||
| Magneto ignition advance angle | 27º±2º | |||
| Rated power and corresponding speed kW (r/min ± 5%) | 10.5KW/7500±500r/min | |||
| Maximum net power and corresponding speed kW (r/min ± 5%) | 11Kw/7000±500r/min | |||
| Maximum torque and corresponding speed N.m (r/min ± 5%) | 17.5N.m/5500±500r/min | |||
| The minimum fuel consumption rate is less than g/Kw. h | 367g/KW.h | |||
Phone: 023-81663070
E-mail: DCW123456879@163.com
Address: No. 55 Yinxiang Avenue, Tuchang Town, Hechuan District, Chongqing, China
Contact Us