First, the vehicle parameters |
Name of the parameter item | The value of the parameter item |
Dimensions (length×width×height) mm | 2080×810×1140 |
Wheelbase mm | 1360 |
Minimum ground clearance mm | 265 |
Seat cushion height mm | 910 |
Lever Swing Corner (Left/Right) | 34 |
Minimum turning radius mm | 2340 |
Final gear ratio | 16:42 |
Gradeability | 30 |
Number of seats | 1 (except driver) |
Shift mode | International 5th gear |
Fuel tank volume L | 10 |
Type of fuel | gasoline |
Rated maximum load mass Kg | 150 |
The dry weight of the whole vehicle is kg | A total of 132 front 62 rear 70 |
Passenger mass kg for 1 person | A total of 205 front, 89, and 116 last |
Passenger mass kg for 2 passengers | A total of 280 front, 96 and 184 rear |
Curb weight Kg | A total of 140 front, 66, and 77 after |
The maximum total load mass is kg | 290 |
The maximum speed is km/h | 95 |
Braking performance m | 7 |
Starting performance S | ≤15(0-200M) |
Fuel consumption L/100Km | 2.9 |
Braking method | Front wheel | Disc brakes |
| Rear wheels | Disc brakes |
Brake operation | Front wheel | Hand brake |
| Rear wheels | Foot brake |
Rim type | Mesh wheels |
Rim specifications | 1.85χ19 in front / 2.15×17 in rear |
Tire type | Off-road tires |
Tire specifications | Front/90/90-19 Rear/110/90-17 |
Tire pressure (front/rear) Kpa | Front 225/Rear 280 |
Large bulb specifications and illumination | 12V 7W/15.1W |
Turn Bulb Specifications | 12V 1.56W |
Battery specifications | MG6.5L/Gel battery |
Second, the engine parameters |
Engine type | CGN200-A built-in balancer shaft, single-cylinder, four-stroke, air-cooled, vertical, with balancer shaft |
Magneto type | 12V 8-pole full-wave AC |
Stroke mm | 63.5mm |
Bore mm | 62.2mm |
Cylinder working volume ml | 196.9ml |
Compression ratio | 9.0:1 |
Fuel grades | RQ90 |
Total oil capacity L | 1.15L |
Spark plug model | D8RTC |
Spark plug clearance mm | 0.6~0.7 |
Valve clearance mm | 0.05±0.02mm |
Start mode | Electric/Foot starting |
Lubricant grades | 15W/40 |
Lubrication method | Pressure spatter |
Ignition method | CDI |
Carburetor model | PZ30 |
Carburetor type | Plunger type |
Transmission type | Five international gears |
Clutch type | Manual, wet multi-piece |
Primary gear ratio | 3.333 |
Gear ratio | 1st gear: 3.000, 2nd gear: 2.071, 3rd gear: 1.529, 4th gear: 1.150, 5th gear: 0.954 |
Output transmission mode | Chain drive |
Direction of rotation of the output shaft | Facing the output shaft, rotate counterclockwise |
Dimensions (length×width×height) mm | 330×330×430 |
Net weight Kg | 32Kg |
Magneto ignition advance angle | 15º ±2º before top dead center |
Maximum net power and its corresponding speed kW(r/min±5%) | 10.0Kw/7000r/min |
Maximum torque and corresponding speed N.m(r/min±5%) | 14N.m/5500r/min |
The minimum fuel consumption rate is less than g/KW.h | ≤354 |
Tire size and braking method can be selected according to customer requirements |