一、specification |
English item | specification |
Overall dimension (length × wide × Height) mm | 1950×675×1100mm |
Wheelbase mm | 1265 |
Minimum ground clearance mm | 160 |
Seat cushion height mm | 780 |
Operating handle return angle (left/right) | ≤48° |
Minimum turning radius mm | 2000 |
Final transmission ratio | 14:36 |
Climbing slope | ≥18° |
Seats | 2 |
Shift mode | Four and a half cycles |
Fuel tank volume L | 4 |
Fuel type | 90# GB484-89 |
Rated maximum load kg | 150 |
Net weight kg | 100 |
Curb weight Kg | 105 |
Maximum load total kg | 250 |
Maximum speed Km/h | 85 |
Braking performance m | ≤7m/30km/h |
Starting performance S | ≤15S |
Rated power Kw/r/min | 5.2KW/8500±500r/min |
Economic fuel consumption L/100Km | 2.1 |
Brake | front | disc brake |
rear | disc brake |
Brake operation | front | Hand brake |
rear | foot brake |
wheel | Aluminum wheel |
spoke wheel size | front:1.4×17 rear :1.6×17 |
tyre | Inner and outer tyre |
tyre size | front:2.50-17 rear:2.75-17 |
Tyre pressure (front/rear) Kpa | 280/280 |
Specification and illumination of large bulb | 12V-35W/35W ≥10000cd |
Steering bulb specification | 12V-10W |
Battery specification | 2N5-3B/120×60×130 |
二、 ENGINE SPECIFICATION |
Engine type | Four-stroke, air-cooled, single-cylinder, Horizontal type |
Magneto type | 12V/level 6/full wave, |
Stroke mm | 55.5 |
Cylinder diameter mm | 54 |
Working volume of cylinder ml | 127.1 |
Compression ratio | 8.7:1 |
Fuel grade | 90 # gasoline |
Total oil capacity L | 0.8 |
Spark plug model | A7RTC |
Spark plug gap mm | 0.6~0.7 |
Valve clearance mm | 0.05±0.02mm |
Starting mode | Electric start/kick start |
Lubricating oil grade | 15W/40 |
Lubrication method | Splash pressure lubrication |
Ignition mode | C.D.I |
Carburetor model | PZ20 |
Carburetor type | Horizontal suction plunger type |
Transmission type | Constant mesh two-stage transmission and five-speed transmission |
Clutch type | Multi-disc oil bath manual clutch |
Primary gear ratio | 4.058 |
Gearshift ratio | i1=2.833 ,i2=1.761.i3=1.236,i4=0.958
|
Output transmission mode | Chain drive |
Rotation direction of output shaft | Face the output shaft and rotate counterclockwise |
Overall dimension (length × wide × Height) mm | 460mm×300mm×260mm |
Net mass Kg | 23±1 |
Magneto ignition advance angle | 15º±2º |
Rated power and corresponding speed kW (r/min ± 5%) | 5.2KW/8500±500r/min |
Maximum net power and corresponding speed kW (r/min ± 5%) | 5.5KW/7500rpm |
Maximum torque and corresponding speed N.m (r/min ± 5%) | 9.2N.m/5500 rpm |
The minimum fuel consumption rate is less than g/Kw. h | 367g/KW.h |