一、specification |
English item | specification |
Overall dimension (length × wide × Height) mm | 1900×700×1080mm |
Wheelbase mm | 1220 |
Minimum ground clearance mm | 130 |
Seat cushion height mm | 800 |
Operating handle return angle (left/right) | ≤45° |
Minimum turning radius mm | 1800 |
Final transmission ratio | 41/14=2.92 |
Climbing slope | ≥28° |
Seats | 2 |
Shift mode | Manual labor |
Fuel tank volume L | 3.8 |
Fuel type | 93# |
Rated maximum load kg | 150 |
Net weight kg | 86 |
Curb weight Kg | 90 |
Maximum load total kg | 240 |
Maximum speed Km/h | ≥80 |
Braking performance m | ≤7m/30km/h |
Starting performance S | ≤15S |
Rated power Kw/r/min | 5.6KW/7500r/min |
Economic fuel consumption L/100Km | 3.2 |
Brake | front | disc brake |
rear | disc brake |
Brake operation | front | Hand brake |
rear | foot brake |
wheel | Spoke wheel |
spoke wheel size | front:1.4×7 rear :1.6×17 |
tyre | off -raod tyre |
tyre size | front:2.50-17 rear:2.75-17 |
Tyre pressure (front/rear) Kpa | 225/250 |
Specification and illumination of large bulb | 12V-35W/35W ≥10000cd |
Steering bulb specification | 12V-10W |
Battery specification | 12N5-3B/ Water bottle /120*60*130 |
二、 ENGINE SPECIFICATION |
Engine type | Four-stroke, air-cooled, single-cylinder, Horizontal type |
Magneto type | 12V/level 6/full wave, |
Stroke mm | 49.5 |
Cylinder diameter mm | 56.5 |
Working volume of cylinder ml | 124 |
Compression ratio | 8.8:1 |
Fuel grade | 93 # gasoline |
Total oil capacity L | 0.8 |
Spark plug model | A6TC |
Spark plug gap mm | 0.6~0.7 |
Valve clearance mm | 0.05±0.02mm |
Starting mode | Electric start/kick start |
Lubricating oil grade | 15W/40 |
Lubrication method | Splash pressure lubrication |
Ignition mode | C.D.I |
Carburetor model | PZ19 |
Carburetor type | Horizontal suction plunger type |
Transmission type | Manual labor |
Clutch type | Multi-disc oil bath manual clutch |
Primary gear ratio | 4.059 |
Gearshift ratio | i1=2.833,i1=1.761.i3=1.238,i4=0.958 |
Output transmission mode | Chain drive |
Rotation direction of output shaft | Face the output shaft and rotate counterclockwise |
Overall dimension (length × wide × Height) mm | 460×300×260 |
Net mass Kg | 22±1 |
Magneto ignition advance angle | 15º±2º |
Rated power and corresponding speed kW (r/min ± 5%) | 5.6KW/7500r/min |
Maximum net power and corresponding speed kW (r/min ± 5%) | 6.0Kw/7500r/min |
Maximum torque and corresponding speed N.m (r/min ± 5%) | 9.3N.m/5000r/min |
The minimum fuel consumption rate is less than g/Kw. h | 367g/KW.h |