一、specification |
English item | specification |
Overall dimension (length × wide × Height) mm | 1900×690×1120mm |
Wheelbase mm | 1290 |
Minimum ground clearance mm | 130 |
Seat cushion height mm | 780 |
Operating handle return angle (left/right) | ≤48° |
Minimum turning radius mm | 1840 |
Final transmission ratio | 15:36 |
Climbing slope | ≥22° |
Seats | 2 |
Shift mode | Four speed cycle with high protection |
Fuel tank volume L | 3.6 |
Fuel type | 90# |
Rated maximum load kg | 140 |
Net weight kg | 95 |
Curb weight Kg | 99 |
Maximum load total kg | 190 |
Maximum speed Km/h | 82.4 |
Braking performance m | ≤7m/30km/h |
Starting performance S | ≤14.87S |
Rated power Kw/r/min | 4.53KW |
Economic fuel consumption L/100Km | 1.5 |
Brake | front | Disc brake |
rear | Drum brake |
Brake operation | front | Hand brake |
rear | foot brake |
wheel | Aluminum wheel |
spoke wheel size | front:1.4×17 rear :1.6×14 |
tyre | Inner and outer tyre |
tyre size | front:2.50-17 rear:80/100-14 |
Tyre pressure (front/rear) Kpa | 280/280 |
Specification and illumination of large bulb | 12V-35W/35W ≥10000cd |
Steering bulb specification | 12V-10W |
Battery specification | MG5-3B/ Colloid battery /120*60*130/ Solid/whiteboard/case blue |
二、 ENGINE SPECIFICATION |
Engine type | Four-stroke, air-cooled, single-cylinder, Horizontal type |
Magneto type | C100 power 12V octet full wave AC |
Stroke mm | 55.5 |
Cylinder diameter mm | 52.4 |
Working volume of cylinder ml | 127.1 |
Compression ratio | 9.2:1 |
Fuel grade | 90 # gasoline |
Total oil capacity L | 0.8 |
Spark plug model | NGK |
Spark plug gap mm | 0.6~0.7 |
Valve clearance mm | 0.05±0.02mm |
Starting mode | Electric start/kick start |
Lubricating oil grade | 15W/40 |
Lubrication method | Splash pressure lubrication |
Ignition mode | C.D.I |
Carburetor model | PZ20(Youli) |
Carburetor type | Plunger type |
Transmission type | The teeth are usually in four gears. With high grade protection |
Clutch type | 120 automatic |
Primary gear ratio | 4.058 |
Gearshift ratio | i1=2.833 , i2=1.705. i3=1.238, i4=0.958
|
Output transmission mode | Chain drive |
Rotation direction of output shaft | Face the output shaft and rotate counterclockwise |
Overall dimension (length × wide × Height) mm | 460×300×260 |
Net mass Kg | 22±1 |
Magneto ignition advance angle | 15º±2º |
Rated power and corresponding speed kW (r/min ± 5%) | 5.4KW/7500r/min |
Maximum net power and corresponding speed kW (r/min ± 5%) | 6.5Kw/7500r/min |
Maximum torque and corresponding speed N.m (r/min ± 5%) | 9.2N.m/5500r/min |
The minimum fuel consumption rate is less than g/Kw. h | 367g/KW.h |