| 一、Vehicle parameters |
| Parameter item name | Value of parameter item |
| Dimensions (length x width x height) mm | 2120×780×1170 |
| wheelbase mm | 1300 |
| Minimum ground clearance distance mm | 200 |
| Seat cushion height mm | 850 |
| Operate the turning angle (left/right) | 42° |
| minimum turning radius mm | ≤2700 |
| Final transmission ratio | 14:46 |
| gradeability | ≥22° |
| Seats | 2 |
| Shift mode | Four international levels |
| Fuel tank capacity L | 17 |
| fuel type | 92# |
| Rated maximum load mass Kg | 150 |
| Vehicle dry weight kg | 116 |
| Vehicle curb weight Kg | 123 |
| Factory determined maximum total load mass Kg | 278 |
| maximum speed Km/h | 72 |
| brake performance m | ≤7m/30km/h |
| starting performance S | 15 |
| Economic fuel consumption L/100Km | ≤2.2 |
| Braking method | front wheel | Front drum |
| rear-wheel | Rear drum |
| Braking operation mode | front wheel | hand movement |
| rear-wheel | Foot movement |
| Wheel rim type | Aluminum wheels |
| Rim Specifications | (front)1.4×18;(after)2.15×18 |
| Tire type | Internal and external tires |
| Tire Size | (front)3.00-18;(after)3.50-18 |
| Tire pressure (front/rear) Kpa | (front)250; (after)280 |
| Specification and illuminance of large light bulb | 12V-35W/35W ≥10000cd |
| Steering bulb specifications | 12V-10W |
| Battery specifications and external dimensions (length x width x height) mm | 12N5-3B/Water battery/120*60*130/ |
| 二、Engine parameters |
| engine type | Single cylinder, four stroke, air-cooled, horizontal |
| Magnetic motor type | 12V/Level 6/full wave |
| trip mm | 49.5 |
| Cylinder diameter mm | 52.4 |
| Displacement ml | 106.7 |
| Compression ratio | 9.0 :1 |
| Fuel grade | 92 octane gasoline |
| Total oil capacity L | 0.8 |
| Spark plug model | A7RTC |
| sparking plug gap mm | 0.6~0.7 |
| valve clearance mm | 0.05±0.02 |
| Start mode | Electric starter/foot starter |
| Lubricating oil grade | 15W/40 |
| Lubrication method | Splash lubrication and pressure lubrication |
| Ignition method | C.D.I |
| carburetor type | PZ19 |
| Carburetor type | Flat suction plunger type |
| Transmission type | Constant engagement, two-stage transmission, four speed transmission |
| Clutch type | Multi piece oil bath type Manual clutch |
| Primary transmission ratio | 3.722 |
| Variable speed ratio | first gear3.272,second gear1.938,third gear1.350,Four levels1.043 |
| Output transmission mode | chain drive |
| Output shaft rotation direction | Facing the output axis,Rotate counterclockwise |
| Dimensions (length x width x height) mm | 460×300×260 |
| net mass Kg | 21±1 |
| Magnetic motor ignition advance angle | btdc15º±2º |
| Maximum net power and its corresponding rotational speedkW(r/min±5%) | 4.3KW/7000rpm |
| Maximum torque and corresponding speedN.m(r/min±5%) | 7.2N.m/5000 rpm |
| The minimum fuel consumption rate is less thang/Kw.h | ≤367 |