一、specification |
English item | specification |
Overall dimension (length × wide × Height) mm | 1985x 780 x 1090mm |
Wheelbase mm | 1350mm |
Minimum ground clearance mm | 160mm |
Seat cushion height mm | 800mm |
Operating handle return angle (left/right) | ≤35° |
Minimum turning radius mm | / |
Final transmission ratio | 13:39 |
Climbing slope | ≥22° |
Seats | 2 |
Shift mode | Manual labor |
Fuel tank volume L | / |
Fuel type | 92# |
Rated maximum load kg | 150 |
Net weight kg | 138 |
Curb weight Kg | 156 |
Maximum load total kg | / |
Maximum speed Km/h | 120 |
Braking performance m | ≤7m/30km/h |
Starting performance S | ≤12S |
Rated power Kw/r/min | / |
Economic fuel consumption L/100Km | 2.8 |
Brake | front | Right hand hydraulic disc brake |
rear | Hydraulic disc brake |
Brake operation | front | Hand brake |
rear | foot brake |
wheel | Aluminum wheel |
spoke wheel size | front:3.0×17 rear :4.0×17 |
tyre | Inclined rubber |
tyre size | front:110/70 - 17 rear:140/60 - 17 |
Tyre pressure (front/rear) Kpa | 200/225 |
Specification and illumination of large bulb | / |
Steering bulb specification | / |
Battery specification | GTX9-BS/ Semi-maintenance-free battery /150*87*105/ with electrolyte |
二、 ENGINE SPECIFICATION |
Engine type | Single cylinder vertical 200, liquid cooled, SOHC-4V four valves, built-in balance shaft |
Magneto type | Flywheel rotor type, 12V12 pole full DC |
Stroke mm | 64 |
Cylinder diameter mm | 75 |
Working volume of cylinder ml | 282.7 |
Compression ratio | 10.8:1 |
Fuel grade | 93 # gasoline |
Total oil capacity L | 1700ml |
Spark plug model | NGK CR8EA |
Spark plug gap mm | 0.6~0.7 |
Valve clearance mm | 0.05±0.02mm |
Starting mode | Electric start/kick start |
Lubricating oil grade | 15W/40 |
Lubrication method | Splash pressure lubrication |
Ignition mode | C.D.I |
Carburetor model | PZ34 |
Carburetor type | Horizontal suction plunger type |
Transmission type | Constant mesh two-stage transmission and five-speed transmission |
Clutch type | Multi-disc oil bath manual clutch |
Primary gear ratio | 3.0909 |
Gearshift ratio | i1=3.0 , i2=2.071. i3=1529, i4=1.150,i5=0.954
|
Output transmission mode | Chain drive |
Rotation direction of output shaft | Face the output shaft and rotate counterclockwise |
Overall dimension (length × wide × Height) mm | 330×318×390 |
Net mass Kg | 36.5±0.5 |
Magneto ignition advance angle | 10º±1º |
Rated power and corresponding speed kW (r/min ± 5%) | / |
Maximum net power and corresponding speed kW (r/min ± 5%) | 21Kw/8500r/min |
Maximum torque and corresponding speed N.m (r/min ± 5%) | 25.5N.m/7000r/min |
The minimum fuel consumption rate is less than g/Kw. h | 367g/KW.h |